Nikon Capture NX Update!! (1.32)

Major update:
最新版では、D60のRAW 画像に対応した。また、次の不具合が修正されている。

* 「ピクチャーコントロール」を設定している状態で露出補正を行なうと、輪郭強調が解除される現象
* D1とAi AF Fisheye Nikkor 16mm F2.8 Dで撮影した画像を開いても、「基本画像調整」→「レンズ調整」→「フィッシュアイレンズ」が選択できない現象

Precautions
* This Updater Software operates from the file titled NX1.3.2_EN.exe. Download NX1.3.2_EN.exe to your computer and run the file. This Updater Software updates Capture NX Ver. 1.0.0 – 1.3.0 to Ver. 1.3.2;
* Any version of Capture NX from Ver. 1.0.0 to Ver. 1.3.0 must be installed before proceeding with this update;
* Turn off all virus-scanning software and exit Capture NX or any other application that may be running before proceeding with this installation;
* Microsoft .NET Framework version 2.0 is required to run this Updater Software. If Microsoft .NET Framework version 2.0 is not installed on your computer, the setup wizard will automatically connect to the Internet to download and install the necessary Microsoft .NET Framework software;
* When the Capture NX Ver. 1.3.2 Updater Software is installed, it may be necessary to enter the product key again to confirm ownership of a previous version of the software;
* You must have Administrator authority to run this Updater Software;
* Be sure to read the section, "Modifications enabled with Ver. 1.3.2", before updating the software.

What's New?

Be sure to read this section on updates with this version before updating the software:
Modifications enabled with Ver. 1.3.2:
* Support for RAW images captured with the D60 has been added;
* When exposure compensation was adjusted from Base Adjustments > RAW Adjustments > Exposure Compensation while Picture Control settings were applied from Base Adjustments > Camera Adjustments > Picture Control, the sharpening effect was cancelled. This issue has been resolved;
* When images captured with the D1 and an AI AF Fisheye Nikkor 16mm f/2.8D lens, Fisheye Lens could not be selected from Base Adjustments > Lens Adjustments. This issue has been resolved;
* An issue that prevented accurate display of some items in the Camera Settings palette has been resolved.

Supported cameras
SLR: D1 / D1H / D1X / D100 / D2H / D2Hs / D2x / D2Xs / D200 / D3 / D300 / D40 / D40x / D50 / D60 / D70 / D70s / D80.
COOLPIX: 5000 / 5400 / 5700 / 8400 / 8700 / 8800

Download here:
[Japanese Edition]
http://chsv-soft.nikon-image.com ... ___-132WU-JPNJP.exe [Windows]
http://chsv-soft.nikon-image.com ... ___-132MU-JPNJP.dmg [Macintosh]

[Asian-Pacific Edition]
http://nikon-asia.com/downloadst ... ater/NX1.3.2_EN.exe [Windows]
http://nikon-asia.com/downloadst ... ater/NX1.3.2_EN.dmg [Macintosh]

[European Edition]
ftp://O9AHQfyA:nVnchmyb@ftp.niko ... lWykH/CNX132_en.exe [Windows]
ftp://O9AHQfyA:nVnchmyb@ftp.niko ... lWykH/CNX132_en.dmg [Macintosh]

[Traditional Chinese Edition]
http://nikon-asia.com/downloadst ... ater/NX1.3.2_TC.exe [Windows]
http://nikon-asia.com/downloadst ... ater/NX1.3.2_TC.dmg [Macintosh]

[Simplified Chinese Edition]
http://nikon-asia.com/downloadst ... ater/NX1.3.2_SC.exe [Windows]
http://nikon-asia.com/downloadst ... ater/NX1.3.2_SC.dmg [Macintosh]

[America Edition]
http://nikonusa.com/software/NX/1.3.2/CAPNX132NSAEN.exe [Windows]
http://nikonusa.com/software/NX/1.3.2/CAPNX132NSAEN.dmg [Macintosh]